index :: dyn

dyn.expand2~

stereo dynamic range expander with channel linking

available since version: 0.9.7

---

information

It uses a strength parameter instead of the traditional ratio

arguments:

• STRENGTH expander strength (0: no expanding, 10: almost gating.)
  type: float
  

• THRESHOLD level threshold below which expander kicks in
  type: float
  units: db
  

• ATTACK attack time = time constant when expander is turning on
  type: float
  units: ms
  

• RELEASE release time = time constant coming out of expanding
  type: float
  units: ms
  

methods:

• reset reset to initial state
  

properties:

• @strength Get/set expander strength (0: no expanding, 1: increase level by @range db.)
  type: float
  range: 0..10
  default: 0
  

• @threshold Get/set level threshold above which compression kicks in (100 dB = max level)
  type: float
  units: db
  range: -60..0
  default: -48
  

• @range Get/set max expand range
  type: float
  units: db
  range: -120..0
  default: -120
  

• @attack Get/set time constant when expander is turning on
  type: float
  units: ms
  range: 0.1..100
  default: 10
  

• @release Get/set release time = time constant coming out of expanding
  type: float
  units: ms
  range: 1..500
  default: 50
  

• @hold Get/set hold period
  type: float
  units: samp
  range: 1..255
  default: 128
  

• @knee Get/set a gradual increase in gain reduction around the threshold: below thresh-(knee/2) there is no gain reduction, above thresh+(knee/2) there is the same gain reduction as without a knee, and in between there is a gradual increase in gain reduction
  type: float
  units: db
  range: 0..6
  default: 3
  

• @bypass Get/set bypass flag. If true: bypass 'effected' signal.
  type: bool
  default: 0
  

• @level (readonly) Get current expander level
  type: float
  units: db
  range: 0..90
  default: 0
  

• @refresh Get/set expander level output time interval. If 0 - no output
  type: int
  units: ms
  range: 0..1000
  default: 100
  

• @link Get/set the amount of linkage between the channels: 0 = each channel is independent, 1 = all channels have the same amount of gain reduction
  type: float
  range: 0..1
  default: 1
  

• @active Get/set on/off dsp processing
  type: bool
  default: 1
  

• @osc (initonly) Get/set OSC server name to listen
  type: symbol
  

• @id (initonly) Get/set OSC address id. If specified, bind all properties to /ID/dyn_expand2/PROP_NAME osc address, if empty bind to /dyn_expand2/PROP_NAME.
  type: symbol
  

inlets:

• left input signal
  type: audio
• right input signal
  type: audio
• set expander strength
  type: control

outlets:

• left expanded signal
  type: audio
• right expanded signal
  type: audio
• list: output current expander level in db
  type: control

keywords:

expander mono

See also: [dyn.expand~]

Authors: Serge Poltavsky

License: GPL3 or later